2024 Stull Feeders 600 LB Grain Cube Drag Feed Hopper 600D-2

2024 Stull Feeders 600 LB Grain Cube Drag Feed Hopper 600D-2

This feeder comes with a 5,000 lb. Digital Scale and is ready to bolt in place and start using. This feeder sits down inside the bed of a UTV. The box of this feeder is 16 GA galvanized steel with a 12 GA galvanized steel conveyor frame. It has a 6 inch wide conveyor belt to deliver almost any type of feed. There is a rope to control the chute up and down from the cab without getting out. It has a 12 volt motor with an "on demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery. There is NO cover inside hopper over belt to disturb the flow of feed. This feeder has a capacity of holding up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is designed for bolting to the bottom of UTV bed. NOTE: SOME UTV Models MAY REQUIRE BOLTING TO PLYWOOD OR 2X4 TO HELP CHUTE DROP OVER SIDE PROPERLY. Feeder Dimensions 30D x 44W x 43T. EMPTY FEEDER WEIGHT IS 330 LBS.

RECOMMENDED BATTERY: Group 27M OR 31M MARINE DEEP CYCLE