2024 Stull Feeders 600 LB Grain Cube Drag Feed Hopper 600D-1

2024 Stull Feeders 600 LB Grain Cube Drag Feed Hopper 600D-1

This feeder sits down inside the bed of a UTV. The box of this feeder is 16 GA galvanized steel with a 12 GA galvanized steel conveyor frame. It has a 6 inch wide conveyor belt to deliver almost any type of feed. There is a rope to control the chute up and down from the cab without getting out. It has a 12 volt motor with an "on demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery. There is NO cover inside hopper over belt to disturb the flow of feed. This feeder has a capacity of holding up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is designed for bolting to the bottom of UTV bed. If mounted on load cells for a scale you must use extra metal between load cell and bottom ends of feeder for reinforcement. We offer a bracket for this. NOTE: SOME UTV MODELS MAY REQUIRE BOLTING TO PLYWOOD OR 2X4 TO HELP CHUTE DROP OVER SIDE PROPERLY. Feeder Dimensions 30D x 44W x 39T. EMPTY FEEDER WEIGHT IS 290 LBS.

RECOMMENDED BATTERY: Group 27M OR 31M MARINE DEEP CYCLE