2025 Meyer Manufacturing Twin Screw - Small Family F470

Information

2025 Meyer Manufacturing Twin Screw - Small Family F470

The Meyer F355 and F470 Formula Twin Screw Mixers provide big value. The low profile units provide capacities up to 520 cubic feet with a narrow profile which is often much more convenient than single screw designs.

The single speed design provides fast, efficient processing of your ration including long stemmed hay! A wide array of conveyor options for both front and side door models will handle almost any application. We will make a difference where it counts - at the shaker box!

Features may include:

  • The Formula to a good ration starts with the basics. Precisely engineered tank walls, baffles and screws provide accuracy and consistency that you expect!
  • Precisely Engineered Augers - propel your ration up the center of the auger and then down along the outside walls for fast processing while maximizing end-to-end movement between the 2 screws.
  • Lead Edge Scraper is adjustable and replaceable, it is responsible for initiating efficient feed movement in the Formula Mixer (Heat treated - high carbon steel).
  • Auger Discharge Kicker Arm (right side of graphic) provides an extra sweep with every revolution, allowing smoother feedout in less time!
  • Unique 3 piece knife design saves you time and money! This system offers added strength, simple adjustability and reduced replacement costs. (tungsten carbinate coated knives)
  • Meyer offers a standard 2 blade knife for typical rations or an aggressive 3 section knife for rations with high volumes of long stem material.
  • Step Baffle System aids in feed movement, reduces horsepower requirements while eliminating overprocessing! Made from High Carbon Steel to reduce wear.
  • This simple, integrated subframe provides the lowest possbile load height with maximum strength. 3 point weighing is standard on small frame units.

Photos

Highlights

  • Lockwood, Missouri
  • 2025
  • Meyer Manufacturing
  • Twin Screw - Small Family F470
  • Available
  • Conveyor - Front/Side: 30" / 36" | Tread: 98"
  • Frt Cross Conveyor - flat belt: 20.25" | Frt Cross Conveyor - belt incline-24"/36"/48" @ 45deg.: 38"/44"/52" | Frt Cross Conveyor - chain incline-24"/36"/48" @ 45deg.: 38"/47"/56"| Side Conveyor-24"/36"/48"/60"/72" @45deg.: 34"/43"/51"/60"/68" | Side Slide Tray: 8" | Side Belt Extension: 16"

Specifications

  • 2025
  • Meyer Manufacturing
  • Twin Screw - Small Family
  • F470
  • Truck Mount
  • Drive: 540 rpm | Tractor Requirement - PTO: 90 hp
  • Planetary: In-Line Drive | Protection: shear-bolt
  • 385/65R22.5 (2)
  • RPM - standard / high: 40
  • Sidewall Thickness: 1/4" | Floor Thickness: 1/2" | Flat Front Cross Conveyor Travel-Left or Right: 8" | Door Opening - Front: 35" x 40" | Side: 35" x 40" | Rear: 35" x 40" | Side Belt Extension: 3" | Side Slide Tray: 5" | Side Conveyor-24"/36"/48"/60"/72": 22"/33"/45"/56"/67" | Frt Cross Conveyor - Flat belt: 7" | Frt Cross Conveyor - belt incline-24"/36"/48": 20"/26"/35" | Frt Cross Conveyor - chain incline-24"/36"/48": 17"/29"/40"
  • 68"
  • 2 7/8"
  • Mixing Chamber: 175"
  • Upper: 1/2" | Lower: 5/8"
  • Side Door / Front Door: 219"/249"
  • Conveyor - Front/Side: 30" / 36" | Tread: 98"
  • frt conveyor / side conveyor w/36" ext.: 98"/110"
  • Base Machine: 98" | Belt Extensions: 104" | Hay Retention Ring: 104"
  • Frt Cross Conveyor - flat belt: 20.25" | Frt Cross Conveyor - belt incline-24"/36"/48" @ 45deg.: 38"/44"/52" | Frt Cross Conveyor - chain incline-24"/36"/48" @ 45deg.: 38"/47"/56"| Side Conveyor-24"/36"/48"/60"/72" @45deg.: 34"/43"/51"/60"/68" | Side Slide Tray: 8" | Side Belt Extension: 16"
  • Maximum Net Load - pounds: 15,600
  • Cubic Feet - no extension / with extension: 470/520
  • Tongue - % gross: 10%
  • Auger Number: 2 | Trailer or Subframe: single-axle | Scale System: 3-point
  • adjustable - per auger (Standard/Available): 4/8