Current Hutchinson-Mayrath Portable-Augers HX2-Series-Swingaway-Augers HX2 16" Series

2024 Hutchinson - Mayrath HX2 16" Series 16-85

2024 Hutchinson - Mayrath HX2 16" Series 16-85

Swipe to View More

  • Year 2024
  • Make Hutchinson - Mayrath
  • Model HX2 16" Series
Shop Hutchinson - Mayrath Pre-Owned
Product Details Specifications Photos
2024 Hutchinson - Mayrath HX2 16" Series 16-85

2024 Hutchinson - Mayrath HX2 16" Series 16-85

  • Year 2024
  • Manufacturer Hutchinson - Mayrath
  • Model Name HX2 16" Series
  • Trim Name 16-85
  • Generic Type (Primary) General
  • Engine Power Required (With Dry Wheat): 150 - 175 hp

2024 Hutchinson - Mayrath HX2 16" Series 16-85

The HX2 has been designed to withstand all the wear and tear a farm can throw at it.

The improved durable boot is built to last longer and make inspection and servicing easier, while also making life easier with a better PTO holder and an additional holder to store hoses.

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)

Features may include:

Open Discharge Spout

New open discharge spout decreases horsepower requirements

Trussing

Aircraft cable trussing

Scissor Lift and A-Frame

Scissor lift for 10" and 13" (74'-94') and A-frame support for 13" (114') and 16" models

Axles

Wide standing axles

Engine

Engine Power Required (With Dry Wheat): 150 - 175 hp

PTO

PTO Type Shaft: 50E doube CV with 2-bolt shear

Drivetrain

Gears Speed Reducer Gearbox: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability

Wheels & Tires

Tires, Rear Specification 22.5" (57.2 cm) agricultural tires

Hydraulics

Maximum Pressure Required To Raise Auger: 2500 psi (172.4 bar)

Dimensions

Dimensions Tube Connectors: 1/4" (0.6 cm) angle flange | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Greaseless Hanger Bearing For Boot (New): 2 3/8" (6 cm) ID, triple seal | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Hydraulic Lift: 2 x 4 1/2" (11.4 cm) cylinder with 3/8" (1 cm) cable | Undercarriage: 4" (10.2 cm) x 8" (20.3 cm) HSS tubing | Wheel Tread: 148" - 182" (375.9 - 462.3 cm) | Reach Lowered: 46' (14 m) | Reach Halfway: 43'-4" (13.2 m) | Reach Raised: 39'-10" (12.1 m) | Reach To Lif Tarms: 26'-4" (8 m) | Reach To Wheels: 31'-9" (9.7 m)
Axle Bearing Extensions, Front 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5 cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
Length Low Profile Hopper: 68" (172.7 cm) with flat free tires
Width Low Profile Hopper: 46 1/2" (118.1 cm) with flat free tires
Height Low Profile Hopper: 11" (27.9 cm) with flat free tires | Lowered: 12'-7" (3.8 m) | Halfway: 33'-4" (10.1 m) | Raised: 47'-3" (14.4 m) | At Lif Tarms: 23'-8" (7.2 m) | At Wheels: 28'-7" (8.7 m)
Transport Height 15' 6" (4.7 m)

Features

Features Parking Jack: 12,000 lbs (5443.1 kg) | Sprocket + Chain:
Gauges Tube: 10 ga
Flighting Type Main: 15" (38.1 cm) x 1/4" (0.6 cm) stretched and welded | AR: 1/4" (0.6 cm) on boot | SHAFT: 3.5" (8.9 cm) x 11 ga tubing; square flight connector
Construction Material Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays
Hub Type 8-bolt agricultural type

Product Photography