Current Hutchinson-Mayrath Portable-Augers HX2-Series-Swingaway-Augers HX2 16" Series

2024 Hutchinson - Mayrath HX2 16" Series 16-125

2024 Hutchinson - Mayrath HX2 16" Series 16-125

Swipe to View More

  • Year 2024
  • Make Hutchinson - Mayrath
  • Model HX2 16" Series
Shop Hutchinson - Mayrath Pre-Owned
Product Details Specifications Photos
2024 Hutchinson - Mayrath HX2 16" Series 16-125

2024 Hutchinson - Mayrath HX2 16" Series 16-125

  • Year 2024
  • Manufacturer Hutchinson - Mayrath
  • Model Name HX2 16" Series
  • Trim Name 16-125
  • Generic Type (Primary) General
  • Engine Power Required (With Dry Wheat): 195 - 225 hp

2024 Hutchinson - Mayrath HX2 16" Series 16-125

The HX2 has been designed to withstand all the wear and tear a farm can throw at it.

The improved durable boot is built to last longer and make inspection and servicing easier, while also making life easier with a better PTO holder and an additional holder to store hoses.

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)

Features may include:

Open Discharge Spout

New open discharge spout decreases horsepower requirements

Trussing

Aircraft cable trussing

Scissor Lift and A-Frame

Scissor lift for 10" and 13" (74'-94') and A-frame support for 13" (114') and 16" models

Axles

Wide standing axles

Engine

Engine Power Required (With Dry Wheat): 195 - 225 hp

PTO

PTO Type Shaft: 50E doube CV with 2-bolt shear

Drivetrain

Gears Speed Reducer Gearbox: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability

Wheels & Tires

Tires, Rear Specification 22.5" (57.2 cm) agricultural tires

Hydraulics

Maximum Pressure Required To Raise Auger: 2000 psi (137.9 bar)

Dimensions

Dimensions Tube Connectors: 1/4" (0.6 cm) angle flange | Wear Edge Technologytm (Reinforced Flight): 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Greaseless Hanger Bearing For Boot (New): 2 3/8" (6 cm) ID, triple seal | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Hydraulic Lift: 2 x 6 1/2" (16.5 cm) bore cylinders; 1/2" (1.3 cm) aircraft cable | Undercarriage: 4" (10.2 cm) x 8" (20.3 cm) HSS tubing | Wheel Tread: 148" - 182" (375.9 - 462.3 cm) | Reach Lowered: 68'-8" (20.9 m) | Reach Halfway: 63'-8" (19.4 m) | Reach Raised: 48'-9" (14.9 m) | Reach To Lif Tarms: 44'-4" (13.5 m) | Reach To Wheels: 56'-9" (17.3 m)
Axle Bearing Extensions, Front 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5 cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
Length Low Profile Hopper: 68" (172.7 cm) with flat free tires
Width Low Profile Hopper: 46 1/2" (118.1 cm) with flat free tires
Height Low Profile Hopper: 11" (27.9 cm) with flat free tires | Lowered: 14'-3" (4.3 m) | Halfway: 48'-6" (14.8 m) | Raised: 87'-10" (26.8 m) | At Lif Tarms: 31'-6" (9.6 m) | At Wheels: 37'-1" (11.3 m)
Transport Height 17' 6" (5.3 m)

Features

Features Parking Jack: 12,000 lbs (5443.1 kg) | Sprocket + Chain:
Gauges Tube: 10 ga
Flighting Type Main: 15" (38.1 cm) x 1/4" (0.6 cm) stretched and welded | AR: 1/4" (0.6 cm) on boot | SHAFT: 3.5" (8.9 cm) x 11 ga tubing; square flight connector
Construction Material Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays
Hub Type 8-bolt agricultural type

Product Photography