2024 Hutchinson - Mayrath HX2 13" Series 13-94

Information

2024 Hutchinson - Mayrath HX2 13" Series 13-94

The HX2 has been designed to withstand all the wear and tear a farm can throw at it.

The improved durable boot is built to last longer and make inspection and servicing easier, while also making life easier with a better PTO holder and an additional holder to store hoses.

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)

Features may include:

Open Discharge Spout

New open discharge spout decreases horsepower requirements

Trussing

Aircraft cable trussing

Scissor Lift and A-Frame

Scissor lift for 10" and 13" (74'-94') and A-frame support for 13" (114') and 16" models

Axles

Wide standing axles

Photos

Highlights

  • Lockwood, Missouri
  • 2024
  • Hutchinson - Mayrath
  • HX2 13" Series 13-94
  • Available
  • Low Profile Hopper: 40" (101.6 cm) with flat free tires
  • Low Profile Hopper: 10" (25.4 cm) with flat free tires | Lowered: 8'-9" (2.7m) / 4'-6" (1.4 m) | Halfway: 38'-3" (11.7 m) / 17'-1" (5.2 m) | Raised: 60'-11" (18.6 m) / 30' (9.1 m)

Specifications

  • 2024
  • Hutchinson - Mayrath
  • HX2 13" Series
  • 13-94
  • General
  • Required (With Dry Wheat): 125-165 hp
  • Shaft: 55E constant velocity with 2-bolt shear
  • 16" (40.6 cm) TRF
  • Required To Raise Auger: 2050 psi (141.3 bar)
  • Tube Connectors: Heavy-duty ¼" (0.6 cm) angle flange | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Greaseless HangerBearing For Boot (New): 1 15/16" (4.9 cm) ID, triple seal | Lower Bearing: Custom 2" (5.1 cm) taper roller bearing assembly | Hydraulic Lift: Two 4 ½" (11.4 cm) single acting cylinders | Undercarriage: 4" (10.2 cm) x 8" (20.3 cm) scissor lift | Wheel Tread: 146" - 182" (370.8 cm - 462.3 cm) | Reach Lowered: 50'-2" (15.3 m) | Reach Halfway: 48'-3" (14.7 m) / 46'-4" (14.1 m) | Reach Raised: 40'-11" (12.5 m) / 38'-5" (11.7 m)
  • 3 1/2" (8.9 cm) x 3 1/2" (8.9 cm) square tube
  • Low Profile Hopper: 60" (152.4 cm) with flat free tires
  • Low Profile Hopper: 40" (101.6 cm) with flat free tires
  • Low Profile Hopper: 10" (25.4 cm) with flat free tires | Lowered: 8'-9" (2.7m) / 4'-6" (1.4 m) | Halfway: 38'-3" (11.7 m) / 17'-1" (5.2 m) | Raised: 60'-11" (18.6 m) / 30' (9.1 m)
  • 12' (3.7 m)
  • Parking Jack: 5000 lbs (2,268 kg) side wind | Sprocket + Chain: Hardened tooth sprocket with HD #80 chain
  • Tube: 12 ga
  • Main: 11 3/4" (29.8 cm) OD x 1/4" (0.6 cm) stretched and welded with AR flighting at critical points | AR: 1/4" (0.6 cm) on hopper, transition, incline tube, and boot | SHAFT: High strength 3" (7.6 cm) OD x 11 ga tubing square flight connection
  • Tube Trussing: 2 ½" (6.4 cm) steel tube
  • 6-bolt agricultural type