2024 Hutchinson - Mayrath HX2 13" Series 13-74

Information

2024 Hutchinson - Mayrath HX2 13" Series 13-74

The HX2 has been designed to withstand all the wear and tear a farm can throw at it.

The improved durable boot is built to last longer and make inspection and servicing easier, while also making life easier with a better PTO holder and an additional holder to store hoses.

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)

Features may include:

Open Discharge Spout

New open discharge spout decreases horsepower requirements

Trussing

Aircraft cable trussing

Scissor Lift and A-Frame

Scissor lift for 10" and 13" (74'-94') and A-frame support for 13" (114') and 16" models

Axles

Wide standing axles

Photos

Highlights

  • Lockwood, Missouri
  • 2024
  • Hutchinson - Mayrath
  • HX2 13" Series 13-74
  • Available
  • Low Profile Hopper: 40" (101.6 cm) with flat free tires
  • Low Profile Hopper: 10" (25.4 cm) with flat free tires | Lowered: 8'-9" (2.7 m) / 4'-6" (1.4 m) | Halfway: 31'-2" (9.5 m) / 12'-7" (3.8 m) | Raised: 49'-6" (15.1 m) / 24'-4" (7.4 m)

Specifications

  • 2024
  • Hutchinson - Mayrath
  • HX2 13" Series
  • 13-74
  • General
  • Required (With Dry Wheat): 110-125 hp
  • Shaft: 35E constant velocity with 3 /8" (1 cm) shear bolt
  • 16" (40.6 cm) TRF
  • Required To Raise Auger: 1500 psi (103.4 bar)
  • Tube Connectors: Heavy-duty ¼" (0.6 cm) angle flange | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Greaseless HangerBearing For Boot (New): 1 15/16" (4.9 cm) ID, triple seal | Lower Bearing: Custom 2" (5.1 cm) taper roller bearing assembly | Hydraulic Lift: Two 4" (10.2 cm) single acting cylinders | Undercarriage: 4" (10.2 cm) x 8" (20.3 cm) scissor lift | Wheel Tread: 146" - 182" (370.8 cm - 462.3 cm) | Reach Lowered: 39'-8" (12.1 m) | Reach Halfway: 38'-3" (11.7 m) / 36'-7" (11.2 m) | Reach Raised: 32'-6" (9.9 m) / 30'-6" (9.3 m)
  • 3 1/2" (8.9 cm) x 3 1/2" (8.9 cm) square tube
  • Low Profile Hopper: 60" (152.4 cm) with flat free tires
  • Low Profile Hopper: 40" (101.6 cm) with flat free tires
  • Low Profile Hopper: 10" (25.4 cm) with flat free tires | Lowered: 8'-9" (2.7 m) / 4'-6" (1.4 m) | Halfway: 31'-2" (9.5 m) / 12'-7" (3.8 m) | Raised: 49'-6" (15.1 m) / 24'-4" (7.4 m)
  • 11' 7" (3.5 m)
  • Parking Jack: 5000 lbs (2,268 kg) side wind | Sprocket + Chain: Hardened tooth sprocket with HD #80 chain
  • Tube: 12 ga
  • Main: 11 3/4" (29.8 cm) OD x 1/4" (0.6 cm) stretched and welded with AR flighting at critical points | AR: 1/4" (0.6 cm) on hopper, transition, incline tube, and boot | SHAFT: High strength 3" (7.6 cm) OD x 11 ga tubing square flight connection
  • Tube Trussing: 3/8" (1 cm) aircraft type galvanized steel cable
  • 6-bolt agricultural type