Current Hutchinson-Mayrath Portable-Augers HX2-Series-Swingaway-Augers HX2 10" Series

2024 Hutchinson - Mayrath HX2 10" Series 10-53

2024 Hutchinson - Mayrath HX2 10" Series 10-53

Swipe to View More

  • Year 2024
  • Make Hutchinson - Mayrath
  • Model HX2 10" Series
Shop Hutchinson - Mayrath Pre-Owned
Product Details Specifications Photos
2024 Hutchinson - Mayrath HX2 10" Series 10-53

2024 Hutchinson - Mayrath HX2 10" Series 10-53

  • Year 2024
  • Manufacturer Hutchinson - Mayrath
  • Model Name HX2 10" Series
  • Trim Name 10-53
  • Generic Type (Primary) General
  • Engine Power Required (With Dry Wheat): 45-50 hp

2024 Hutchinson - Mayrath HX2 10" Series 10-53

The HX2 has been designed to withstand all the wear and tear a farm can throw at it.

The improved durable boot is built to last longer and make inspection and servicing easier, while also making life easier with a better PTO holder and an additional holder to store hoses.

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)

Features may include:

Open Discharge Spout

New open discharge spout decreases horsepower requirements

Trussing

Aircraft cable trussing

Scissor Lift and A-Frame

Scissor lift for 10" and 13" (74'-94') and A-frame support for 13" (114') and 16" models

Axles

Wide standing axles

Engine

Engine Power Required (With Dry Wheat): 45-50 hp

PTO

PTO Type Shaft: 14E constant velocity with one shear bolt

Wheels & Tires

Tires, Rear Specification 15" (38.1 cm) TRF

Hydraulics

Maximum Pressure Required To Raise Auger: 1000 psi (68.9 bar)

Dimensions

Dimensions Tube Connectors: Heavy-duty 3/16" (0.5 cm) angle flange | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Lower Bearing: 1 ½" (3.8 cm) pillow block greaseable ball bearing | Hydraulic Lift: 4" (10.2 cm) single acting cylinder | Undercarriage: 3" (7.6 cm) x 11 ga A-frame | Wheel Tread: 106" (2.7 m) | Reach Lowered: 27'-1" (8.3m) | Reach Halfway: 25'-1" (7.6m) | Reach Raised: 22'-5" (6.8m) | Reach To Liftarms: 21'-11" (6.7m) | Reach To Wheels: 24'-7" (7.5m)
Axle Bearing Extensions, Front 2 1/2" (6.4 cm) x 2 1/2" (6.4 cm) x 1/8" (0.3 cm) wall square tubing
Length Low Profile Hopper: 60" (152.4 cm) with flat free tires
Width Low Profile Hopper: 40" (101.6 cm) with flat free tires
Height Low Profile Hopper: 10" (25.4 cm) with flat free tires | Lowered: 10'-8" (3.3m) | Halfway: 24'-6" (7.5m) | Raised: 36'-7" (11.2m) | At Liftarms: 14'-10" (4.5m) | At Wheels: 16'-10" (5.1m)
Transport Height 12' 6" (3.8m)

Features

Features Parking Jack: 2,000 lbs (907.2 kg) side wind | Sprocket + Chain: Hardened tooth sprocket with HD #60 chain
Gauges Tubing: 12 GA
Flighting Type Main: 9" (22.9 cm) OD x 7 ga stretched and welded with AR flighting at critical points | AR: 1/4" (0.6 cm) on hopper, transition, incline tube, and boot | SHAFT: High strength 2" (5.1 cm) OD x 11 ga tubing square flight connection
Construction Material Tube Trussing: 5/16" aircraft type galvanized steel cable
Hub Type 4-Bolt Agricultural Type

Product Photography