HDGS96 for sale at S&H Farm Supply, Inc.. Serving your new and used equipment needs from Lockwood, Rogersville, Mountain Grove, and Joplin, MO.

Grading Scraper HDGS96

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

The Rhino grading scraper cuts material from high spots and deposits it in the low spots, leveling the surface. Available in widths of 60", 72", and 84", this scraper will fit your needs with a minimum number of passes over the surface.

Designed for economical use, the grading scraper only requires 30-50 HP, depending on model. Additionally, heat treated shanks with replaceable hardened tips that can rip down 2-3/8" are standard on every Rhino Grading Scraper!

The offset angled blades use 1/2" x 6" cutting edges that are reversible and replaceable for long life, and the 13-3/4" tall side panels allow for large volume movement of loose material. Full length replaceable wear skids are standard for long life in tough conditions!

 

  • Smooths gravel driveways, roadways, and parking lots by cutting material from the high spots and moving it to the low spots.
  • Uses two offset angled blades with ½" reversible and replaceable cutting edges for long life
  • Category 1 hitch and quick hitch compatible for easy hook up
  • Tall side panels allow moving large volumes of material without leaving spill out ridges.

 

HDGS96
Working Width 96"
Tractor HP 90 - 2WD 72 - 4 WD
Blades 2, Angled
Cutting Edge ½" x 6" bolt-on,replaceable,reversible heat treated
Side Panel Thickness 3/16"
Skid Shoe 1/2" x 2- 1/2 x 52" long
Hitch CAT 1 & 2 QH
Front Frame Beam 4" x 4" x 3/8" Wall
Rear Frame Beam 4" x 4" x 1/4" Wall
No. Shank Position 3/4" x 2-1/2" x 19 1/8" 4 holes, Heat Treated Plow Point
No. of Shanks 8
Approximate Weight (lbs) 828