Specifications: 499 available from S&H Farm Supply, MO

 

499

Auger  

Auger

NA

Floating range, in. (mm)

NA

Speed, rpm

NA
Conditioner

Conditioner

Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment

Roll length (crushing area), in. (mm)

110 (2794)

Roll diameter, in. (mm)

10-3/8 (264)

Drives   

Gear/shaft

Speed, rpm 

665

Pressure, lbs./in. (N/mm)

2 to 38 (0.3 to 6.6)

Roll gap adjustment

Shims

Material discharge, in. (mm)

Adjustable gate for swath, windrow or intermediate widths

 

38 and 100 (965 and 2540)
Cutterbar

Cutterbar

Two opposing assemblies, timed, dual, counter-stroking sickles

Knives

Bolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles

Guards

Twin, forged steel, double-hardened hold-downs

Cutting height, in. (mm)

1.25 to 6.25 (32 to 159)

Cutting angle, degrees

-4 to -10, mech std

Hydraulic tilt

Guard points max lift, in. (mm)

19-1/2 (495)

Skid shoes

2

Sickle drive

enclosed gearbox

Sickle speed, spm

1700

Sickle stroke, in. (mm)

3 (76)
Cutting Width

Cutting Width, ft. in. (mm)

12'3" (3734)
Dimensions

Overall width, operating, ft. in. (mm)

19'8" (5994)

Overall width, transport, ft. in. (mm)

13'9" (4191)

Overall length, transport, ft. in. (mm)

21'6" (6553)

Overall height, operating, ft. in. (mm)

6'2-1/2" (1892)

Overall height, raised, ft. in. (mm)

6'8-1/2" (2045)
Drive

Drive

540 or 1000 rpm PTO
Hydraulic Cylinders

Hydraulic Cylinders

Standard header lift, Standard tongue shift
Minimum Tractor Req

Minimum Tractor Req

60-hp (45 kw)

 

Two remote hydraulic circuits required capable of 1750 psi (12066 kpa)
Operating Speed

Operating Speed, mph (kph)

up to 8 (13)

Max safe transport speed, mph (kph)

25 (40)
Reel

Reel

Rolareel

Peripheral speed, mph (kph)

standard: 4.8 to 7.9 (7.7 to 12.7), with reduction kit 4.0 to 6.6 (6.5 to 10.7)

Speed Adjustment

Variable sheave

Diameter (maximum), ft. in. (mm)

3'7-1/2" (1105)

Adjustments

Fore/aft and vertical

Drive 

Belt and chain

Bushings/bearings, in. (mm)

1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires

Tires

11L x 14 4-ply ag implement (HUT)
Tractor Hookup

Tractor Hookup

Hydrostatic
Weight

Weight, lbs. (kg)

4480 (2032)