472 for sale at S&H Farm Supply, Inc.. Serving your new and used equipment needs from Lockwood, Rogersville, Mountain Grove, and Joplin, MO.

Haybine Mower-Conditioner 472

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

472 and 488 MODEL HAYBINE® MOWER-CONDITIONERS 

These side-pull models offer traditional producers just right capacity with a low power requirement and base models require no hydraulic connections ideally suited for classic tractors, many of today's compact models, as well as small utility tractor models.

MOW AND CONDITION WITH EVEN SMALL UTILITY TRACTORS
Ideal for small acreage operations, the side-pull Haybine® models 472 and 488 offer traditional producers clean sickle cutting while requiring minimal tractor horsepower requirements of only 30 and 35 PTO horsepower respectively. The side-pull design works well for producers who mow small contour strips, and oddly shaped fields. With the mower-conditioner offset to the tractor’s right side, the design allows you to mow clockwise around fields. The standard drawbar attachment offers easy drop pin hookup without a drawbar extension.

THE CONVENIENCE OF A PIVOT-TONGUE HITCH
Get the capacity of a self-propelled windrower with the center-pivot design that’s standard on the H7150 trail frame when equipped up with an HS Series 14-, 16-, or 18-foot head.

NO TRACTOR HYDRAULICS REQUIRED
Haybine® models 472 and 488 require no tractor hydraulics whatsoever. A rope-pull tongue swing latch is provided to transition from transport to working positions, then just manually lower the head and go to work. For tractors with at least one single-acting hydraulic circuit, an optional hydraulic head lift kit is available.

 

Haybine® 472
Auger
Auger NA
Floating range, in. (mm) NA
Speed, rpm NA
Conditioner
Conditioner Chevron-design intermeshing molded rubber rolls, torsion-bar roll pressure, single hand-crank adjustment
Roll length (crushing area), in. (mm) 85 (2159)
Roll diameter, in. (mm) 7-3/4 (199)
Drives    Individual, #50 roller chain
Speed, rpm  818
Pressure, lbs./in. (N/mm) 2 to 38 (0.3 to 6.6)
Roll gap adjustment Shims
Material discharge, in. (mm) Adjustable gate for swath, windrow or intermediate widths
   38 and 72 (965 and 1829)
Cutterbar
Cutterbar One assembly
Knives Bolted, over-serrated sections, adjustable assemblies, timed, dual, counter-stroking sickles
Guards Twin, forged steel, double-hardened hold-downs
Cutting height, in. (mm) 1.25 to 4.25 (32 to 108)
Cutting angle, degrees -7 or -10
Hydraulic tilt NA
Guard points max lift, in. (mm) 18-1/2 (470)
Skid shoes 2
Sickle drive wobble joint
Sickle speed, spm 1632
Sickle stroke, in. (mm) 3 (76)
Cutting Width
Cutting Width, ft. in. (mm) 7'3" (2210)
Dimensions
Overall width, operating, ft. in. (mm) 11'11" (3632)
Overall width, transport, ft. in. (mm) 10'4-3/4" (3168)
Overall length, transport, ft. in. (mm) 13'1" (3988)
Overall height, operating, ft. in. (mm) 3'5-3/4" (1060)
Overall height, raised, ft. in. (mm) 4'8" (1422)
Drive
Drive 540 rpm PTO
Hydraulic Cylinders
Hydraulic Cylinders Optional header lift, Rope control
Minimum Tractor Req
Minimum Tractor Req 30-hp (22.4 kw)
  One remote hydraulic circuit required, capable of 1500 psi (10342 kpa)
Operating Speed
Operating Speed, mph (kph) up to 8 (13)
Max safe transport speed, mph (kph) 25 (40)
Reel
Reel 4-tine bar
Peripheral speed, mph (kph) 6.2 to 8.2 (10.4 to 13.2)
Speed Adjustment Variable sheave
Diameter (maximum), ft. in. (mm) 3'6-1/4" (1073)
Adjustments Fore/aft, vertical, pitch
Drive  Belt and chain
Bushings/bearings, in. (mm) 1.25 (31.75) bearing w/collar at cam end and bushings at all other locations
Tires
Tires 25 x 7.50-15 flotation
Tractor Hookup
Tractor Hookup Equal-angle PTO
Weight
Weight, lbs. (kg) 2110 (957)