Kuhn VARI-LANDER XC 4 - 7

VARI-LANDER XC 4 - 7 for sale at S&H Farm Supply, Inc.. Serving your new and used equipment needs from Lockwood, Rogersville, Mountain Grove, and Joplin, MO.

Vari-Lander VARI-LANDER XC 4 - 7

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Disc Coulters

Fitted with non-stop security for the Vari-Lander, the disc coulters are available in plain or notched form. The discs ensure a clean cut in front of the plow bottom giving a clean furrow wall and improving the trash incorporation of the moldboard. The discs are adjustable in two dimensions: height and side to side.

Hydraulic Steering

The rear wheel is steered by a hydraulic cylinder slaved to a headstock mounted master cylinder. Complete and precise steering control is achieved with a minimum of wearing parts for a long and trouble free service life. A pair of large capacity accumulators cushions shock loads on the steering system allowing the operator to even back over dead furrows without worry.

Multiple Moldboard Options

N Moldboard
V Slastted Moldboard
HC Slatted Moldboard

The N bottom with a cylindrical front and helicoidal rear offers high versatility with a low draught requirement. Giving a well formed plow furrow, the H bottom is well adapted to heavy clay soils. The Slatted V comprises independent and interchangeable slats. The slats serve to reduce blocking in sticky soil conditions.

Variable Width System

Available exclusively from Kuhn, the variable width mechanism is enclosed inside the plow beam. All linkages and pivot points are in this way protected from damage and wear caused by impact, dirt and corrosion.

Depth and Steering Control

In the work position, the wheel works “on land” for optimal performance and minimum soil compaction. The wheel is situated on the end for the best possible weight distribution and increased traction at the tractor wheels. In the transport position the width is limited to an easy to manage 8.2’. The rear wheel is steered hydraulically by the headstock to follow all tractor maneuvers.

Number of bodies 4.7
Maximum authorised tractor power (kW) 155
Maximum Authorised Tractor Power (hp) 240
Safety Non Stop Hydraulic
Plowing width (inches) 11 to 22
Underbeam clearance (cm) 87
Underbeam clearance (inches) 34.25"
Point-to-point clearance (cm) 115
Point-to-point clearance (inches) 45"
Beam section (mm) 220
Beam section (inches) 8.5"
Type of bodies Any classic type