Kuhn VARI-MASTER 123 NSH - 4 bodies

New Equipment » Kuhn » Plows » Mounted Rollover Plows » Vari-Master 123 » VARI-MASTER 123 NSH - 4 bodies

VARI-MASTER 123 NSH - 4 bodies for sale at S&H Farm Supply, Inc.. Serving your new and used equipment needs from Lockwood, Rogersville, Mountain Grove, and Joplin, MO.

Vari-Master 123 VARI-MASTER 123 NSH - 4 bodies

View Other Models:

Get a Quote


Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend


Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Plow Leg Protection Options

Traction-Bolt Security
Non-Stop Hydraulic Reset
The Master Series allows you to customize your plow leg protection to best suit your working conditions with either traction-bolt security or non-stop hydraulic reset. A clean break of the traction bolt, following a force of 5,280 – 8,820 pounds at the plow point, avoids the risk of nuisance shearing. With the non-stop hydraulic reset, a rapid breakaway of the plow leg occurs when a field obstacle is met. Once the obstacle is passed there is an increase in pressure, bringing the body quickly and firmly back into working position. The system also acts as a shock absorber in rocky ground, increasing plow life.


Moldboards are made of unequal layer, heat-treated Triplex® steel that have an increased working life up to 40% and a hard wearing surface over 1/8” thick. Forged with a force of 6,000 tons ensuring excellent wear resistance and self-sharpening profile due to the grain in the steel resulting from the forging process. Depending on the soil type, Kuhn offers three different types of moldboards. The H4 moldboard is recommended for fall plowing, as it is suited for heavy and damp clays. The N moldboard is recommended for spring plowing because it is versatile and works well in sandy or clay soils. The VP slatted moldboard is designed for use in extremely sticky muck and clay soils, but is not for us in soils with rocks or stones.

Main Beam

The main beam is supported by a side-mounted triangular reinforcement welded along the length of the front section. This strengthens the beam in this high-stress area and gives substantial advantages when compared to a conventional plow design.

Number of bodies 4
Maximum authorised tractor power (kW) 103
Maximum Authorised Tractor Power (hp) 140
Safety Non Stop Hydraulic
Plowing width (inches) 12 to 20
Underbeam clearance (inches) 29" / 75
Point-to-point clearance (inches) 35" / 90
Beam section (inches) 4.5" / 120
Type of bodies Any classic type