2810 for sale at S&H Farm Supply, Inc.. Serving your new and used equipment needs from Lockwood, Rogersville, Mountain Grove, and Joplin, MO.

2810 Single Flex-Wing Rotary Cutters 2810

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Performance Features
  • Wing skids are 3/8” thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.

Construction Features
  • Industry first, massive 3-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torqueto blade pan.
  • The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
  • Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

 

Safety Features

  • Highway safety lighting is standard.

 

Product Features

Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.

The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.

Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Model 2810
Cutting Width 10 ft. 6 in.
Cutting Height 2 in. to 14 in.
Hitch Perma-Level
Minimum Tractor PTO HP 60HP
Side Band 1/4 In. x 12 in.
Blade Pan Round
PTO Driveline EZ Lube, ASAE CAT 6
Wing Drivelines EZ lube, ASAE Cat. 4
Wing Flex 22° degrees down/87° degrees up
Wing Free Float 22° degrees down/45° degrees up
Splitter Gearbox Rating 250 HP
Cutting Gearbox Rating 225 HP
Gearbox Warranty 6 Years
Blade Tip Speed 16,000' per minute
Cutting Capacity 4 in.
Top Deck Center Section 11 ga.
Bottom Deck Center Section 7 gal.
Deck, Wings 7 gal.
Axle Cushions Spring at each wheel
Main Axles, greaseable with bushings 5/16 in. wall tube
Axle Arms, greaseable with bushings 3 in. x 3 in.