DHP8 for sale at S&H Farm Supply, Inc.. Serving your new and used equipment needs from Lockwood, Rogersville, Mountain Grove, and Joplin, MO.

DHP Series Pull Disc Harrows DHP8

View Other Models:

Get a Quote

GET A QUOTE

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

SEND TO A FRIEND

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Performance Features
  •  Square and rectangle tube steel frames and gang tubes
  •  Adjustable gang angles, front and rear
  •  Variable blade spacing's available: 9” front and rear gangs for tough-to-cut “New Ground”
  •  7 1/2” front and rear gangs for finer soil finishing
  •  9” front gangs/ 7 1/2” rear gangs–the best of both worlds
  •  Notched disc blades for maximum cutting action
  •  1 1/8” square, high carbon steel gang axles
  •  Available in tractor colors
  •  Optional disc scrapers, Center Sweep Kit, Dual Wheel Transport Kit
Model Number DHP8
Drawbar horsepower requirement 40-65 hp
Hitch type Pull-type w/clevis & hole for 1 1/4” pin
Approximate transport width 8’-10”
Max. cultivation width 8’-6”
Mainframe width 60”
Approx weight load on each blade (lbs.) 85-95
Disc blade sizes and types 20” or 22” Notched
Disc blade spacing 7.5” or 9” or a combination of both
Disc bearing type Triple lip sealed ball bearings
Number of bearings 8
Forward gang angle adjustment 15, 16.5, 18, 19.5, 21 Degrees
Rear gang angle adjustment 12, 13.5, 15, 16.5, 18 Degrees
Hitch frame construction 4” x 4” x 1/4” tubing
Slide mainframe construction 4” x 3” x 1/4” tubing
Mainframe front & rear tube construction 5” x 3” x 1/4” tubing
Mainframe middle tube construction 4” x 3” x 1/4” tubing
Gang arm construction 4” x 3” x 1/4” tubing
Gang axles 1 1/8” Square, High Carbon Steel
Front to rear leveling system Manual crank adjustment
Depth control Cylinder stroke control spacers
Hydraulic cylinder 3- 1/2” x 8” ASAE hydraulic cylinder
Transport tires and wheels Two 9.5L x 15 tires on 15” x 6” - 5 bolt wheels
Parking jack Standard
AVAILBLE OPTIONS  
Disc Scrapers, Center Sweep Kit, Dual Wheel Transport Kit